Based on the design of 232 chipset and serial port this tool with 16
pins is specially designed for the diagnosis of Volvo. It could
support the most challenging time-critical applications like serial
EEPROM programming while the LED light indicates communicating status.
It could work with the following models:
Volvo 800 series: C70 S40 V40 S70 V70
Volvo 900 series: S90 V90
Volvo FCR is a Windows-based Diagnostic Program for Volvo that
emulates functions of a dealer level expensive proprietary scan tool.
Control module coverage includes:
ABS.
Automatic transmission.
SRS - airbag & other protection systems.
Driver & passenger seat memories.
Instruments including service light reset.
Climate control - air conditioning.
Immobilizer.
Alarm.
Road traffic information.
Additional heater.
Usage:
Note: You must install volvo FCR on your PC's hard disk -- it will not
work properly if you try running it directly from a floppy or CD.
However you can use a floppy or CD to move the distribution file from
a PC with internet access to another PC that does not have internet
access.
For laptops and PCs download the shareware 1.3
Run it and follow the prompts to allow it to install itself.
Connect the interface between the computer and the car by plugging one
end of the interface into a serial (RS232) (or USB port ) on your PC
and the other end directly into the OBD-II port present passenger
vehicles.
Turn the car's ignition switch ON. Don’t need to start the engine.
Start the Volvo program.
Now it works. Make sure the software can reliably access all the
control modules that it should in your car.
Specifications:
Perfectly fit for the above-mentioned Volvo models
Color: blue
Quantity of pins: 16 pcs
Quantity: 1 set(1 OBD2 device and 1 CD)
Package: well-packed
Brand new and unused
